Acopia Networks ARX 6000 Guide d'installation télécharger pdf (Page 78)

Chapter 7

Connecting the Switch to the Network

7 - 14

See the ARX® CLI Network-Management Guide for detailed configuration

instructions.

Connecting the Ethernet Management Port

After you boot the switch, you can connect the Ethernet out-of-band

management port on the SCM to a management station or network. You can

use this interface to access the Graphical User Interface (GUI) or the

Command Line Interface (CLI). To access the GUI, direct a web browser to

the interface over HTTPS (for example, “https://10.1.27.69/”). Use the

crypto-officer username and password, entered above, to log in. For the CLI,

use SSH with the interface and the crypto-officer username (for example,

The ARX

GUI Quick Start: Network Setup manual contains instructions for

getting started with the GUI, and the ARX® CLI Network-Management

Guide contains instructions and best practices for using the CLI to set up the

ARX

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 103 104

Pas de commentaire

Acopia Networks ARX 6000 Guide d'installation Page 78