Acopia Networks ARX 6000 Guide d'installation télécharger pdf (Page 48)

Chapter 5

System Specifications

5 - 4

System Power Requirements

The ARX

6000 chassis uses one or two power supplies. When two power

supplies are installed, the power load is shared. The power supplies require a

20 A/220 Vac input cord, which is provided with the chassis. The AC outlet

to the switch must be properly grounded.

Table 5.2

lists the system (fan tray and modules) power consumption.

The total power dissipated by the chassis is the sum of all of the above

divided by 0.88 (the power supply runs at 88% efficiency). Specifically,

Hardware module dimensions (SCM,

ASM, NSM)

Height: 15.25 in. (38.74 cm)

Width: 1.75 in. (4.45 cm)

Depth: 20 in. (50.8 cm)

Hardware module power

(SCM, ASM, NSM)

(See Table 5.2

for power

consumption information.)

Input voltage: -48 Vdc

Component Power (Watts)

Typical Maximum

System Control Module (SCM) 160 W 179 W

Network Services Module (NSM) 125 W 137 W

Adaptive Services Module (ASM) 210 W 237 W

Fan Tray (6 fans + fan controller) 105 W 176 W

Table 5.2 Module Power Consumption

Component Specification

Table 5.1 System and Module Specifications (Continued)

1SCMpwr×()nASMpwr×()mNSM× pwr()1fans×()++ +

0.88

--------------------------------------------------------------------------------------------------------------------------------------------------------------------

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

Acopia Networks ARX 6000 Guide d'installation Page 48

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Acopia Networks ARX 6000